Panasonic FP7 User Manual page 55

PROCEDURE
1. Select "Options" > "Multi I/O Unit Setting" in the menu bar.
The "Mufti I/O Unit Setting" dialog box will be displayed. Select a unit to be used.
2. Select "Interrupt" from the "Selection of function" tree, and double-click an
interrupt number to which the interrupt input is allocated.
The "InterruptAdvanced" dialog box will be displayed.
3. Select an arbitrary interrupt condition.
A used terminal number will be automatically allocated.
4. Press the [OK] button.
The selected condition will be registered in the interrupt execution condition. The
following figure shows the example that "Interrupt terminal input (OFF->ON)" is
allocated to the interrupt number INT0 of Multi I/O Unit.
The set values will be effective when they are downloaded with programs or other
configuration information as a project.
6.1 Interrupt Function
6-3