Display Command Summary - Keithley SourceMeter 2400 User Manual

18-8 SCPI Command Reference
Table 18-2

DISPlay command summary

Command
:DISPlay
:ENABle <b> Turn on or turn off front panel display.
:ENABle? Query state of display.
:CNDisplay Return to source-measure display state.
[:WINDow[1]] Path to locate message to top display:
:TEXT Control user test message:
:DATA <a>
:DATA?
:STATe <b>
:STATe?
:DATA? Query data on top portion of display.
:ATTRibutes? Query attributes of message characters:
:WINDow2 Path to locate message to bottom display:
:TEXT Control user test message:
:DATA <a>
:DATA?
:STATe <b>
:STATe?
:DATA? Query data on bottom portion of display.
:ATTRibutes? Query attributes of message characters:
:DIGits <n> Specify display resolution (4 to 7).
:DIGits? Query display resolution
Notes:
1. *RST and :SYSTem:PRESet has no effect on the display circuitry. Pressing LOCAL or cycling power enables (ON) the display
circuit.
2. *RST and :SYSTem:PRESet has no effect on a user-defined message. Pressing LOCAL or cycling power cancels all user-defined
messages.
3. *RST and :SYSTem:PRESet has no effect on the state of the message mode. Pressing LOCAL or cycling power disables (OFF)
the message mode.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2400 Series SourceMeter
Description
Define ASCII message "a" (up to 20
characters).
Query text message.
Enable or disable message mode.
Query text message state.
blinking (1) or not blinking (0).
Define ASCII message "a" (up to 32
characters).
Query text message.
Enable or disable message mode.
Query text message state.
blinking (1) or not blinking (0).
®
User's Manual
Default
parameter SCPI
(Note 1)
(Note 2)
(Note 3)
(Note 2)
(Note 3)
6