Source Command Summary - Keithley SourceMeter 2400 User Manual

®
2400 Series SourceMeter User's Manual
Table 18-7

SOURce command summary

Command
[:SOURce[1]] Path to control sourcing:
:CLEar Path to clear source:
[:IMMediate] Turn selected source off.
:AUTO <b> Enable or disable auto clear for source.
:AUTO? Query state of auto clear.
:MODE <name>
:MODE?
:FUNCtion Source selection:
:SHAPe <name> Model 2430 Only — Select output mode
:SHAPe? Query output mode.
[:MODE] <name> Select source mode (VOLTage, CURRent
[:MODE]? Query source selection
:DELay <n> Specify settling time (in sec): 0 to
9999.999.
:AUTO <b> Enable or disable auto settling time.
:AUTO? Query state of auto settling time.
:DELay? Query source settling time.
:CURRent Path to configure I-Source:
:MODE <n> Select I-Source mode (FIXed, SWEep, or
:MODE? Query I-Source mode.
:RANGe <n>|UP|DOWN| Select fixed I-Source range.
:AUTO <b>
:AUTO?
:RANGe? Query I-Source range setting.
[:LEVel] Set I-Source level (in amps):
[:IMMediate]
[:AMPLitude] <n>
[:AMPLitude]?
1. For the Model 2430 Pulse Mode, auto clear is always enabled. This command is ignored.
2. For the Model 2430 Pulse Mode, source delay is not used. This command is ignored.
3. The parameter values for this command are provided with the detailed command reference information. Detailed information on
SCPI commands follows the last command summary table in this section.
4. If source V is active.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SCPI Command Reference
Description
Specify auto clear mode (ALWays or
TCOunt).
Query auto clear mode.
(DC or PULSe).
or MEMory).
2
2
LIST).
3
Enable or disable autoranging.
Query state of autoranging.
Set level immediately:
3
Specify current level.
Query current level.
18-13
Default Source
parameter SCPI memory
1
OFF
ALWays
DC
VOLTage
0
ON
FIXed
4
1.05e-4
ON
4
0