Attributes? - Keithley SourceMeter 2400 User Manual

®
2400 Series SourceMeter User's Manual

ATTRibutes?

:DISPlay[:WINDow[1]]:ATTRibutes?
:DISPlay:WINDow2:ATTRibutes?
Description This query command is used to determine which characters on the dis-
play are blinking and which are not. The response message provides that
status of each character position for the specified display. The primary
display consists of 20 characters and the secondary display consists of
32 characters.
1 = Character is blinking
0 = Character is not blinking
For example, assume the following menu is displayed with the
SAVESETUP option blinking:
MAIN MENU
SAVESETUP COMMUNICATION CAL >
The response message for :DISP:ATTR? (top display) will result in 20
zeroes as follows:
00000000000000000000
The response message for :DISP:WIND2:ATTR? (bottom display) will
display ones at the character positions for SAVESETUP as follows:
11111111100000000000000000000000
CNDisplay
:DISPlay:CNDisplay
Description This action command is used to return the instrument to the source-
measure display state (source, measure, and compliance readings
displayed). For example, if a menu structure is presently being
displayed, this command will exit the menu and return to the source-
measure display state.
Read display
DATA?
:DISPlay[:WINDow[1]]:DATA?
:DISPlay:WINDow2:DATA?
Description
These query commands are used to read what is currently being dis-
played on the top and bottom displays. After sending one of these com-
mands and addressing the SourceMeter to talk, the displayed data
(message or reading) will be sent to the computer.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SCPI Command Reference 18-47
Query attributes; top display
Query attributes; bottom display
Return to source-measure display state
Read top display
Read bottom display