Status Command Summary - Keithley SourceMeter 2400 User Manual

18-18 SCPI Command Reference
Table 18-8

STATus command summary

Command
:STATus
:MEASurement Control measurement event registers:
[:EVENt]? Read the event register.
:ENABle <NDN> Program the enable register.
or <NRf>
:ENABle? Read the enable register.
:CONDition? Read the condition register.
:OPERation Control operation status registers:
[:EVENt]? Read the event register.
:ENABle <NDN> Program the enable register.
or <NRf>
:ENABle? Read the enable register.
:CONDition? Read the condition register.
:QUEStionable Control questionable status registers:
[:EVENt]? Read the event register.
:ENABle <NDN> Program the enable register.
or <NRf>
:ENABle? Read the enable register.
:CONDition? Read the condition register.
:PRESet Return status registers to default states.
:QUEue Path to access error queue:
[:NEXT]? Read the most recent error message.
:ENABle <list> Specify error and status messages for error queue.
:ENABle? Read the enabled messages.
:DISable <list> Specify messages not to be placed in error queue.
:DISable? Read the disabled messages.
:CLEar Clears all messages from error queue.
Notes:
1. Commands in this subsystem are not affected by *RST and :SYSTem:PREset. The effects of cycling power, *CLS and
:STATus:PRESet, are explained by the following notes.
2. Event Registers — Power-up and *CLS clears all bits. :STATus:PRESet has no effect.
3. Enable Registers — Power-up and :STATus:PRESet clears all bits. *CLS has no effect. Accepts the SCPI 1995.0 mandated (non-
decimal numeric) format (#H, #Q, or #B).
4. Error Queue — Power-up and *CLS clears all bits of the registers.
5. Error Queue Messages — Power-up clears list of messages. *CLS and :STATus:PRESet have no effect.
6. Register Query Commands — The format for the response messages (ASCII, hexadecimal, octal, or binary) depends on which
data format is presently selected (see "Status register format," page
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2400 Series SourceMeter
Default
Description parameter SCPI
(Note 1)
6
(Note 2)
(Note 3)
6
6
6
(Note 2)
(Note 3)
6
6
6
(Note 2)
(Note 3)
6
6
(Note 4)
(Note 5)
(Note 5)
18-56).
®
User's Manual