Table 3-4 Auto Source Delay; Front Panel Source Delay - Keithley SourceMeter 2400 User Manual

®
2400 Series SourceMeter User's Manual
Table 3-4
Auto source delay
2400 2410
I-range I-range
1µA 1µA
10µA 10µA
100µA 100µA
1mA 1mA
10mA 20mA
100mA 100mA
1A 1A
*10A range only on Model 2430.

Front panel source delay

To set the manual source delay from the front panel:
1. Press CONFIG then SOURCE V.
2. Select DELAY from the displayed choices, then press ENTER.
3. Enter the desired DELAY value, then press ENTER.
4. Press EXIT to return to normal display.
To set the auto source delay state from the front panel:
1. Press CONFIG then SOURCE V.
2. Select AUTO DELAY from the displayed choices, then press ENTER.
3. Select ENABLE or DISABLE as desired, then press ENTER.
4. Press EXIT to return to normal display.
Remote command source delay
Use the :SOURce:DELay or :SOURce:DELay:AUTO commands to program the source
delay via remote. (See
command sets the source delay to 500ms:
:SOUR:DEL .5
Similarly, send the following command to enable auto delay:
:SOUR:DEL:AUTO ON
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Basic Source-Measure Operation
2420 2425/2430 2440
I-range I-range I-range
10µA 10µA 10µA
100µA 100µA 100µA
1mA 1mA 1mA
10mA 10mA 10mA
100mA 100mA 100mA
1A 1A 1A
3A 3A/10A* 5A
Section 18, "Set delay," for details.) For example, the following
3-13
Auto delay Auto delay
(Source V) (Source I)
3msec 3msec
2msec 1msec
1msec 1msec
1msec 1msec
1msec 1msec
1msec 1msec
1msec 2msec