Evaluating Loops - Dräger Babylog VN500 Instructions For Use Manual

Operation
Selecting the display of parameter fields
1 Touch the parameter field.
The selected parameter field is marked.
Babylog VN500 opens the dialog for the contents of
the parameter field.
Content
Selecting the field size
2 Touch the 1x (C) button for standard size or
2x (D) for double size.
Selecting the display format
3 Touch the (E) button.
The selection list for the display of parameters is
displayed according to the selected size of the pa-
rameter field.
4 Select the display format and confirm with the
rotary knob.
Selecting the parameter
5 Touch the (F) button.
The selection list for the displayable parameters is
displayed.
6 Select the parameter and confirm with the rota-
ry knob.
Closing the dialog
7 Touch the X button. The dialog is closed.
86
E
F
C D
Instructions for Use Infinity Acute Care System – Babylog VN500 SW 2.n
Selecting the display of curve fields
1 Touch the curve field.
The selected curve field is marked. Babylog VN500
opens the dialog for the contents of the curve field.
2 Proceed as described under "Selecting the dis-
play of parameter fields".
Additional information
"Configuring the screen view" on page 144.
"Factory-set screen views" on page 275.

Evaluating loops

500.0
450.0
400.0 C
350.0
300.0
250.0
200.0
150.0
100.0
50.0
0.0
-5.0 0.0 5.0 10.0 15.0
Displaying a reference loop
Touch the Ref. (A) button.
A loop is recorded and displayed as a reference
loop.
The date and the time of the loop appear beside the
(A) button. The reference loop is drawn in black.
The reference loop remains displayed until the Ref.
(A) button is touched again.
Recording the current loop in order to freeze,
display and save it afterwards
Touch the Capture loop (B) button.
D
20.0 25.0 30.0
A
B
E