Operating Concept
Operating concept for Infinity C500
Infinity C500 is the central operating and display
unit. The general operating concept is described in
the Instructions for Use for "Infinity Medical
Cockpits".
Operating concept for Babylog VN500
The following operating concept only contains the
specific information and operating steps for
Babylog VN500.
This chapter describes:
– Main screen
– Main menu bar
– Dialog windows
– Therapy bar
– Therapy controls
– Setting ventilation parameters
– Exceeding the set limit of a ventilation
parameter
– Direct setting of ventilation parameters
(QuickSet)
– Linked setting of ventilation parameters
Main screen
The main screen displays the most important venti-
lation information at a glance.
A
B
32
1 2 3
C
D
Instructions for Use Infinity Acute Care System – Babylog VN500 SW 2.n
A Header bar with the following fields:
– Patient category, see page 60
– System data, e.g., state of charge of the in-
ternal battery, see page 106
– Therapy status: Therapy type (ventilation or
O
Therapy), ventilation mode and addition-
2
al settings
– Alarms, messages and instructions for the
user, see page 112
– Alarm status
B Monitoring area with curves, loops, trends and
measured values, see page 85. The display
can be configured, see page 144.
C Main menu bar with buttons for opening dialog
windows and activating functions, see page 33.
D Therapy bar with the therapy controls for the
ventilation parameters of the active ventilation
mode, see page 34.