Range Of Functions; Ventilation Functions Of Babylog Vn500; Monitoring - Dräger Babylog VN500 Instructions For Use Manual

Range of functions

The functions described correspond to the overall
functionality of Babylog VN500. Some functions
are only optional and may not be included in the
individual device configuration. Optional functions
are shown in the separate list of accessories.

Ventilation functions of Babylog VN500

Ventilation modes:
– Pressure-controlled ventilation:
– PC-CMV
– PC-AC
– PC-SIMV
– PC-PSV
– PC-APRV
– PC-HFO
– PC-MMV
– Support of spontaneous breathing:
– SPN-CPAP/PS
– SPN-CPAP/VS
– SPN-PPS
Additional settings for ventilation:
– Apnea Ventilation
– Flow trigger
– Sigh
– Volume Guarantee
– ATC
– AutoRelease
– HFO-Sigh
– Volume Guarantee (HFO)
Special procedures:
– Suction maneuver
– Manual inspiration/hold
– Medication nebulization
Therapy types:
– Invasive ventilation (Tube)
– O Therapy
2
– Non-invasive ventilation (NIV)
Instructions for Use Infinity Acute Care System – Babylog VN500 SW 2.n
Additional information
For a detailed description of the ventilation modes
and the additional settings see page 236. Abbrevi-
ations see page 25.

Monitoring

Patient monitoring is supported by the following
alarm limit settings:
– Maximum airway pressure Paw
– Expiratory minute volume MV
– Apnea alarm time Tapn
– Respiratory rate RR
– End-expiratory CO
The inspiratory O concentration is monitored by
2
automatically set limits.
Babylog VN500 offers the following displays:
– Curves
– Graphic trends
– Numeric trends
– Loops
– Alarm history
– Logbook
– Numeric parameters
– Preconfigured lists for measured values and set
values
– Customized lists for measured values and set
values
– Smart Pulmonary View
During non-invasive ventilation and O
certain monitoring functions are switched off or can
be switched off.
System Overview
concentration etCO
2 2
therapy,
2
23