Configuring General Settings; Setting A Maneuver - Dräger Babylog VN500 Instructions For Use Manual

Configuration

Configuring general settings

Prerequisite: The Ventilation (A) page is opened.
1 Touch the General settings (B) tab.
System setup
A
C
G
H
I
D
E
F
The following settings can be switched on or off:
– Leakage Compensation (C)
– Automatic return from Apnea Ventilation (D)
– Pmax/Paw high autoset (E)
– Anti Air Shower (F)
2 Touch the On or Off button as appropriate and
confirm with the rotary knob.
Select Slope adjustment (G):
– Slope (H)
– Insp. flow (I)
3 Touch the appropriate button and confirm with
the rotary knob.
Babylog VN500 starts with the selected settings.
158

Setting a maneuver

Prerequisite: The Ventilation (A) page is opened.
1 Touch the Maneuver (B) tab.
System setup
B
Setting the FiO
maneuver
For the suction maneuver, FiO
current FiO
1.0 and 2.0.
2 Touch the (C) or (D) button.
3 Set the factor by turning the rotary knob and
push to confirm.
Babylog VN500 starts with the selected start-up
settings.
Instructions for Use Infinity Acute Care System – Babylog VN500 SW 2.n
A
C D
concentration for the suction
2
is set based on the
2
concentration using a factor between
2
B