Trends and Data
Display data
The following data can be displayed:
– Hospital-specific data
– Measured values 1
– Measured values 2
– Setting values
Measured values are displayed on a blue back-
ground and setting values on a green background.
Displaying hospital-specific data
1 Touch the Trends/Data... button in the main
menu bar.
2 Touch the Values (A) tab.
Trends/Data
A
C
Babylog VN500 opens the page containing the cur-
rent, hospital-specific measured and setting values
(B).
Babylog VN500 displays the hospital-specific mea-
sured and setting values (C)selected in the system
setup.
Additional information
"Configuring the display of hospital-specific mea-
sured values and settings" on page 146.
124
B
C
Instructions for Use Infinity Acute Care System – Babylog VN500 SW 2.n
Displaying all measured values
Prerequisite: The Values (A) page is opened.
Touch the Values 1 (B) or Values 2 (C) tab.
Trends/Data
A
Displaying setting values
Prerequisite: The Values (A) page is opened.
Touch the Settings (B) tab.
Trends/Data
A
B
C
B