Locking Of Therapy Controls In Therapy Bar - Dräger Babylog VN500 Instructions For Use Manual

Configuration
4 Confirm with the OK button (K).
The dialog for the parameter type is closed.
A maximum of 3 parameters can be selected for
each graphic trend display.
5 Select further parameters according to step 2 to
4.
6 Confirm the selected measured values and set
values with the OK button (H).
The selected parameters are displayed in the trend
display. The Setup dialog is closed.
The selection can be aborted with Cancel (I). The
previous selection is displayed in the graphic trend.
Clear (J) can be used to delete all parameter selec-
tions made.
Deselecting a parameter in the trend display
Touch the parameter to be deselected in the pa-
rameter type dialog. The button turns pale
green.
Selecting a time interval
System setup
L
7 Touch the (L) button. Select the time interval
from the selection list: 2, 4, 8, 12 hours, 1 day,
7 days.
148
Locking of therapy controls in therapy
bar
The therapy controls in the therapy bar can be
locked to prevent accidental changes from being
made to the ventilation parameters.
Prerequisite: The Screen layout (A) page is
opened.
1 Touch the Therapy bar (B) tab.
System setup
A
2 Touch the On (C) button.
The therapy controls in the therapy bar are locked.
The ventilation parameters can only be changed in
the Ventilation settings dialog window.
Canceling the lock
On the Therapy bar page, touch the Off (D)
button.
Instructions for Use Infinity Acute Care System – Babylog VN500 SW 2.n
C
D
B