Editing A Plc User Alarm Text - Siemens SINUMERIK 808D Commissioning Manual

Hide thumbs Also See for SINUMERIK 808D:
Table of Contents

Advertisement

Default PLC applications
6.3 PLC user alarms
No.
700056
Change of spindle direction not possible in thread
700057
-
700059
Safe door not closed, NC start not possible
700060
Channel not in reset, change PRT not possible
...
-
700127
-
Note
For more information about NC-PLC interfaces, refer to the
Manual
6.3.4

Editing a PLC user alarm text

For the SINUMERIK 808D control system, you have two methods to edit a PLC user alarm
text:
● the HMI
● a USB stick
Editing a PLC user alarm with the HMI
To edit a PLC user alarm text with the HMI, proceed as follows:
1. In the "SYSTEM" operating area (press key combination:
"PLC" softkey.
2. Press the "Edit PLC alarm text" softkey.
3. Use the up/down arrow key to locate your target alarm text:
52
Alarm description
.
Interface address
DB1600.DBX7.0
DB1600.DBX7.1
DB1600.DBX7.3
DB1600.DBX7.4
...
DB1600.DBX15.7
SINUMERIK 808D Parameter
+
Commissioning Manual, 01/2015, 6FC5397-4EP10-0BA0
Variable
DB1600.DBD1224
DB1600.DBD1228
DB1600.DBD1236
DB1600.DBD1240
DB1600.DBD1508
), press the
Commissioning Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents