W4: Grinding-Specific Tool Offset And Tool Monitoring; Tool Offset For Grinding Operations; Structure Of Tool Data - Siemens SINUMERIK Series Function Manual

W4: Grinding-specific tool offset and tool monitoring

Contents
The topics of this functional description are:
● Grinding-specific tool offset
● Online tool offsets (continuous dressing)
● Grinding-specific tool monitoring
● Constant grinding wheel peripheral speed (GWPS)
References
For fundamentals see:
● Function Manual Basic Functions; Tool Offset (W1)
Programming, mode of operation and handling, please refer to:
● Programming Manual, Fundamentals
17.1

Tool offset for grinding operations

17.1.1

Structure of tool data

Grinding tools
Grinding tools are tools of types 400 to 499.
Tool offset for grinding tools
Grinding tools normally have specific tool and dresser data in addition to cutting edge data.
The specific grinding wheel data for the left and right wheel geometry can be stored under a
T number in
If data are needed for the dresser geometry, they can be stored, e.g., starting at
number or in additional cutting-edge-specific data
(MD18096 $MN_MM_NUM_CC_TOA_PARAM).
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
and .
D1 D2
17
of a T
D3
801