All G Functions - Siemens SINUMERIK 840D sl Operating Manual

3.9.2

All G functions

All G groups and their group numbers are listed in the "G functions" window.
Within a G group, only the G function currently active in the control is displayed.
Additional information in the footer
The following additional information is displayed in the footer:
• Current transformations
Display
TRANSMIT
TRACYL
TRAORI
TRAANG
TRACON
• Current zero offsets
• Spindle speed
• Path feedrate
• Active tool
Proceed as follows
...
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
Description
Polar transformation active
Cylinder transformation active
Orientation transformation active
Inclined axis transformation active
Cascaded transformation active
For TRACON, two transformations (TRAANG and TRACYL or TRAANG and
TRANSMIT) are activated in succession.
1. Select the "Machine" operating area.
2. Press the "JOG", "AUTO", or "MDA" key.
...
3. Press the ">>" and "All G functions" softkeys.
The "G functions" window is opened.
Machine the workpiece
3.9 Display G and auxiliary functions
79