Templates; Overview Of The Templates, Control Functions And Blocks - Siemens SIMOCODE pro Programming And Operating Manual

Templates

2.1

Overview of the templates, control functions and blocks

The templates from the SIMOCODE pro PCS 7 Library V9.0 are templates that you can
adopt unchanged to implement control functions in your project. The templates thus simplify
the engineering for configuring the blocks and they support their problem-free functioning.
You can also modify the templates or create completely new ones. The interconnections that
must then be created manually can be found in the available templates.
Templates for the control functions
The table below assigns the possible control functions to the associated template:
Table 2- 1
No.
1
2
3
4
5
6
7
8
9
38
Templates for the control functions
Control function
Overload relay
Direct starter
Reversing starter
Circuit breaker
Star-delta starter
Star-delta reversing starter
Dahlander
Dahlander reversing starter
Pole-changing starter
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Template
OvlRly (Page 42)
Direct (Page 43)
Reverse (Page 44)
MCCB (Page 45)
StarDel (Page 46)
RevStarDel (Page 47)
Dahland (Page 48)
RevDahl (Page 49)
PoleChng (Page 50)
APL blocks SIMOCODE
blocks
FbSwtMMS MMOprtn
MMMeas
MotL
1
MMStat
Event16Ts
MMLog
FbSwtMMS
MotRevL
1
Event16Ts
FbSwtMMS
MotL
1
Event16Ts
FbSwtMMS
MotL
1
Event16Ts
FbSwtMMS
MotRevL
1
Event16Ts
FbSwtMMS
MotSpdL
1
Event16Ts
FbSwtMMS
Event16Ts MMRevDhl
FbSwtMMS MMOprtn
MMMeas
MMStat
MMLog
MotSpdL MMOprtn
1
Event16Ts MMMeas
FbSwtMMS MMStat
MMLog
SIMOCODE pro PCS 7 Library V9.0
2
1
1
1
1