Renaming File And Directory Properties; Templates; Creating Templates - Siemens SINUMERIK 840D sl Operating Manual

8.8

Renaming file and directory properties

Information on directories and files can be displayed in the "Properties for ..." window.
Information on the creation date is displayed near the file's path and name.
You can change names.
Proceed as follows
8.9

Templates

8.9.1

Creating templates

Introduction
You can store your own templates to be used for creating part programs and workpieces.
These templates provide the basic framework for further editing.
You can use them for any part programs or workpieces you have created.
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
1. Select the Program manager.
2. Choose the desired storage location and position the cursor on the file
or directory whose properties you want to display or change.
3. Press the ">>" and "Properties" softkeys.
The "Properties from ..." window appears.
...
4. Enter any necessary changes.
5. Press the "OK" softkey to save the changes.
Program management
8.8 Renaming file and directory properties
139