Assignment Of The Cyclic Process Image - Siemens SIMOCODE pro Programming And Operating Manual

Additional Measured values for SIMOCODE pro PROFINET devices
Table 4- 65
Modexxxx
0
22
23
24
25
26
27
Assignment to the SIMOCODE pro basic units
The table shows the assignment of the inputs
Table 4- 66
Basic unit type
( BUTyp
BU 1
BU 2
SIMOCODE pro PROFINET:
BU 3
4.4.4.2

Assignment of the cyclic process image

The IO Controller sends cyclic receive data to SIMOCODE pro. The SIMOCODE pro device
returns cyclic send data as a reply.
Table 4- 67
Basic unit type
BU 1
SIMOCODE pro
PROFINET:
BU 3
If the basic unit type 1 uses bytes 2 and 3 of the cyclic receive data, bytes 4 to 9 of the cyclic send
1
data can be additionally assigned.
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Additional Assignment of ModeInxx for SIMOCODE pro PROFINET
Meaning
Measured value is read from data record.
Cyclic measured values:
TM2 – max. temperature
TM2 – temperature 1
TM2 – temperature 2
TM2 – temperature 3
AM2 – input 1
AM2 – input 2
Assignment to the basic units
parameter)
Assignment of PZDOutxx to the analog value output
SIMOCODE pro
byte
2–3
1
4–5
4.4 Block for MMMeas measured value function
PZDInxx
Input word PZDInxx
PZDIn45
PZDIn67
PZDIn89
not available
PZDIn10
PZDIn12
PZDIn14
PZDIn16
PZDIn18
Cyclic receive data
Analog value 1
Analog value 2
Description of the blocks
and to the basic unit types.
Mode
Input ModeInxx
ModeIn45
ModeIn67
ModeIn89
not available
ModeIn10
ModeIn12
ModeIn14
ModeIn16
ModeIn18
PZDOutxx
PZDOut23
PZDOut45
159