Mmmeas - Standard 4 - Siemens SIMOCODE pro Programming And Operating Manual

Description of the blocks
4.4 Block for MMMeas measured value function
Analog module 1 (for SIMOCODE pro devices)
①
Analog values as bars (Ana_OpScale high value, low value)
② Analog values in % (AMIn1, AMIn2, AMIn3, AMOut)
If the background color of the field is white, you can change the value in the expanded
operating area in three ways (authorization level 6 and higher):
● Entry in the input box
● Setting using the slider
● Entry by direct operation
These parameters are enabled when Analog module 1 is connected.
③
Last successfull Timestamp of Read Data
④
Button for updating the data (RdDataOp).
Button is deactivated if RackF_Act = 1, authorization level 5 and higher (ProcessControling)
These parameters are enabled when Analog module 2 is connected.
Note
Only the number of analog inputs which are active will be enabled.
4.4.9.5

MMMeas - Standard 4

Standard 4 view
Module Type
Temperature/Earthfault
Module
170
Availability
Yes
No
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Button Status
SIMOCODE pro PCS 7 Library V9.0
Operation Control
Enabled
Disabled