Acyclic Reading Of Data Record 92; Message Characteristics - Siemens SIMOCODE pro Programming And Operating Manual

4.2.2

Acyclic reading of data record 92

An interconnection is provided between output parameter
and input parameter
Data record 92 is read acyclically, i.e. it is only read when a
at MMOprtn or when either a trip or a warning is triggered by the device.
4.2.3

Message characteristics

MMDiag signals the following errors/faults:
● DP/IO station fault (
● Rack fault (
● Module fault (
● Connection fault (
An error generates a group error
The
with the
the error information of the primary and redundant master system. This information is
provided to output parameters
Message block MsgEvId1
Table 4- 7 Output messages MMDiag
Message block Message No.
MsgEvId1
1
2
3
4
5
6
7
8
* S = AS, OS process control fault
** User-definable message
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
RdData
Rack1Err
)
RackF_Act
)
ModF_Act
BusFlt
and
Subn1_Id Subn2_Id
and
Subn1Id Subn2Id
Block parameters
Rack1Err
Rack2Err
RackF_Act
ModF_Act
BusFlt
**
ExtMsg1
**
ExtMsg2
**
ExtMsg3
of the block MMDiag to enable the acyclic reading of DS92.
, )
Rack2Err
)
in output parameter
GrpErr
parameters of the SUBNET function block (FB106) are linked
parameters of the MMDiag block. These parameters forward
and
Rack1Err Rack2Err
Message text
$$BlockComment$$ Subnet1: @1%d@: Fault
$$BlockComment$$ Subnet2: @2%d@: Fault
$$BlockComment$$ Device
@1%d@/@5%d@/@3%d@: Failure
$$BlockComment$$ Device
@1%d@/@5%d@/@3%d@: Module error
$$BlockComment$$ Device
@1%d@/@5%d@/@3%d@: Not reachable
$$BlockComment$$ External Message 1
$$BlockComment$$ External Message 2
$$BlockComment$$ External Message 3
Description of the blocks
4.2 Diagnostics block MMDiag
of the block MMOrptn
RdDataOut
operation is triggered
ReadData
.
Err_Act
of the MMDiag block.
Message
class *
S
S
S
S
S
S
S
S
95