Evaluation Of The Signal Status Of The Interlock Signals - Siemens SIMOCODE pro Programming And Operating Manual

Description of the blocks
4.1 Functions for all blocks
The
(pushbutton operation) or a static signal (switching mode):
● Starting and stopping a motor
● Opening and closing a valve
Bit = 0: Button mode: Each local command is assigned to a control input. This has a latching
reaction and is 1-active.
Example with a motor MotRevL: In this case, use the interconnectable input parameters.
FwdLocal
RevLocal
StopLocal
Bit = 1: Switching mode: Two static local commands are assigned to a control input.
Example with a motor MotRevL: In this case, use the interconnectable input parameters.
FwdLocal
RevLocal
FwdLocal
Note
The
4.1.10.27

Evaluation of the signal status of the interlock signals

Number of the
Feature2
Feature2 bit purpose
You can use the
checked for the values 16#00 or 16#28.
The signal status of the inputs itself remains unchanged here.
The default setting is 0.
Bit = 0: The signal status is determined, an input with
value = 0.
Bit = 1: No evaluation of the signal status for
92
bit affects the following control inputs for local mode in the form of a pulse
Feature2
= 1 for the command "Start forward"
= 1 for the command "Start backward"
= 1 for the stop command
= 1 for the command "Start forward"
= 1 for the command "Start backwards"
= 0 and RevLocal = 0 for the stop command
control input is irrelevant in this case.
StopLocal
bit: 5
.bit to specify if the signal status of the interlock inputs is to be
Feature2
or
16#00
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
or is forwarded with
ST = 16#00 16#28
.
16#28
SIMOCODE pro PCS 7 Library V9.0