Diagnostics Block Mmdiag; Description Of Mmdiag - Siemens SIMOCODE pro Programming And Operating Manual

Description of the blocks

4.2 Diagnostics block MMDiag

4.2 Diagnostics block MMDiag
4.2.1

Description of MMDiag

Purpose of the block
The MMDiag block is responsible for diagnosis of the SIMOCODE pro device.
● It evaluates the acyclic events:
– Start
– DP/IO station failure
– Module fault
– Process alarm
– Diagnosis alarm
● It generates the associated Quality Codes.
● It reads all diagnostic information for the MOD_SWT block.
● It transmits the status information to the signal processing block via the OMODE
parameter output.
Views
The MMDiag block does not support views.
References
● Overview of the templates, control functions and blocks (Page 38)
● Functions for all blocks (Page 72)
● MMDiag block parameter (Page 234)
● Structure of UDTs for MMDiag (Page 237)
94
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
SIMOCODE pro PCS 7 Library V9.0