Current Limits - Siemens SIMOCODE pro Programming And Operating Manual

Description of the blocks
4.3 MMOprtn block
ModlAct parameter
The ModlAct parameter provides the information on availability of active sensors in the
SIMOCODE pro extended modules by reading the DS132 and DS134.
The data are relevant for:
● Number of active Temperature Sensors
● Number of active Analog Sensors
● Display Voltage - Phase/Line to line
Table 4- 15
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12...15
4.3.6

Current limits

Current limits
The current limits are read out from data record DS130. Reading of the data record is
triggered either via the interconnectable input parameter
the limit value view, or by OS operation (
communication.
The read data are output at the in/out parameters Trip high (
Warning high (
If an error occurs, the values are set to zero and the output
The limit values can also be parameterized in the faceplate. If the values are changed, they
are written to SIMOCODE pro.
106
Assignment
Control function
Reserved
Availability TM1-2 Sensors
Availability TM1-3 Sensors
Availability AM1-2 Active Inputs
Availability AM1-3 Active Inputs
Availability TM2-2 Sensors
Availability TM2-3 Sensors
Availability AM2-2 Active Inputs
Availability AM2-3 Active Inputs
Feature.Bit26
Feature.Bit27
Display Voltage
Reserved
) and Warning low (
Curr_WH
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
RdDataLi
). The
RdDataOp RdWrAct
Curr_TH
).
Curr_WL
RdErr = TRUE
, in the OS when selecting
output is reset during
), Trip low ( ),
Curr_TL
is set.
SIMOCODE pro PCS 7 Library V9.0