Driver Generator; Start-Up Characteristics; Status Information - Siemens SIMOCODE pro Programming And Operating Manual

Description of the blocks
4.6 Block for timestamping MMLog
4.6.7

Driver generator

The "Generate Module Driver" function automatically inserts the MMLog block into the
following organization blocks within the run sequence:
● OB40 (process alarm)
● OB100 (warm restart)
The
4.6.8

Start-up characteristics

In OB100, the identifier for "Start up" is entered in output
The alarm messages are suppressed in the OB100 for the
Acknowledge the errors
4.6.9

Status information

The status information is communicated to WinCC for display in the faceplates.
Table 4- 91
Status1
Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
192
input is parameterized via the information from the HW Config.
DAddr
GrpErr
Status information – MMLog
Description
Occupied
BatchEn
SIMOCODE Device Class
1 = Oos Mode
OosLi Active
0 = Default read logbook
1 =Suppress logbook
0 = On mode
1 = Local mode
Message Lock
Time stamp Active
Logbook error 1 Type
Logbook error 2 Type
Logbook error 3 Type
Logbook error 4 Type
Logbook error 5 Type
Logbook error 6 Type
Logbook error 7 Type
Logbook error 8 Type
Logbook error 9 Type
, , ,
RackF_Act ModF_Act
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
(
OMODE OMODE = 16#xx01xxxx
no. of times.
RunUpCyc
, and
Rack1Err Rack2Err
SIMOCODE pro PCS 7 Library V9.0
).
.