Introduction
1.4 Supported control functions
1.4
Supported control functions
The library supports all SIMOCODE pro control functions. Motor blocks of the Advanced
Process Library (APL) are used for this. For control functions that are not supported by the
APL motor blocks (two directions of rotation, two speeds), the library contains the block
MMRevDhl.
For communication with the SIMOCODE pro device, the channel block FbSwtMMS from the
APL is used.
Device-specific functions that do not belong to the standard of the APL motor blocks are
provided by the other blocks of the SIMOCODE pro Library.
The SIMOCODE pro library V9.0 supports the following control functions:
Table 1- 1
Control function
Overload relay
Direct starter
Reversing starter
Circuit breaker
Star-delta starter
Star-delta reversing starter
Dahlander
Dahlander reversing starter
Pole-changing starter
Pole-changing reversing starter
Valve
Positioners 1–5
Soft starter
Soft reversing starter
12
Supported control functions
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
SIMOCODE
SIMOCODE
pro C
pro S
X
X
X
X
X
X
X
X
–
X
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
X
–
–
SIMOCODE pro PCS 7 Library V9.0
SIMOCODE
pro V
X
X
X
X
X
X
X
X
X
X
X
X
X
X