Siemens SIMOCODE pro Programming And Operating Manual page 231

SIMOCODE pro PROFINET – Maintenance Station
Display
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Remark
Unknown/untested
Trip
Failure
Warning
Signaling
Message
-
Device [Subnet No.]/[Device No.]:
Bad, maintenance alarm
Device [Subnet No.]/[Device No.]:
Failure
Device [Subnet No.]/[Device No.]:
Uncertain, maintenance
demanded
Device [Subnet No.]/[Device No.]:
Good, maintenance required
Maintenance Station
5.1 Maintenance Station
Caused by
PLC in Standby
Tripping *)
General Fault
•
Controller Fault
•
Protection has tripped
•
Level monitoring low/high
•
Miscellaneous
•
Protection extended
•
(TM2) has tripped
Level monitoring
•
extended (AM2) low/high
Miscellaneous extended
•
(AM2)
Event – DM-FP F-Prm
•
error
Failure of PROFINET
connection or Rack Fault or
Module Fault
Warnings *)
Protection has tripped
•
Level monitoring low/high
•
Miscellaneous
•
Protection extended
•
(TM2) has tripped
Level monitoring
•
extended (AM2) low/high
Miscellaneous extended
•
(AM2)
Status signaling *)
Signaling by controller
•
Protection has tripped
•
Signaling caused by
•
parameterization
231