Siemens SIMOCODE pro Programming And Operating Manual page 13

Control functions and blocks
The table shows the control functions and the corresponding blocks with which the APL is
linked into the SIMOCODE pro PCS 7 Library V9.0.
Table 1- 2
Control functions
Overload relay
Direct starter
Soft starter
Circuit breaker
Star-delta starter
Reversing starter
Star-delta reversing starter
Soft reversing starter
Dahlander
Pole-changing starter
Valve
Positioners 1–5
Dahlander reversing starter
Pole-changing reversing starter
MMOprtn can be used for the overload relay control function without APL motor blocks.
1
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Control functions and blocks
1
1.4 Supported control functions
APL blocks Blocks from the
SIMOCODE pro Li-
brary
– MMOprtn
MMDiag
MotL
MMMeas
MMStat
MMLog
MotRevL
MotSpdL
VlvL
VlvMotL
– MMRevDhl
MMOprtn
MMDiag
MMMeas
MMStat
MMLog
Introduction
13