Siemens SIMOTICS CONNECT 400 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Control Unit
  5. SIMOTICS CONNECT 400
  6. Operating instructions manual

Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Connectivity module
Hide thumbs Also See for SIMOTICS CONNECT 400:
Table of Contents

Advertisement

Quick Links

Operating Instructions
Connectivity module
SIMOTICS CONNECT 400
Edition
07/2019
www.siemens.com/sidrive-iq

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMOTICS CONNECT 400

Summary of Contents for Siemens SIMOTICS CONNECT 400

  • Page 1 Operating Instructions Connectivity module SIMOTICS CONNECT 400 Edition 07/2019 www.siemens.com/sidrive-iq...

  • Page 3: Introduction

    Introduction Safety instructions Description Preparations for use SIMOTICS CONNECT 400 Mounting and installation Commissioning Operating Instructions Operation Maintenance Replacement parts Disposal Service & Support Certificates and Licenses 07/2019...

  • Page 4: Safety Instructions

    Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 5: Table Of Contents

    Safety instructions ............................7 General safety instructions.......................7 Qualified personnel ........................7 Security information .........................8 Description..............................9 SIDRIVE IQ Fleet ........................9 "SIMOTICS CONNECT 400" connectivity module ..............9 Data security ..........................11 Preparations for use ...........................13 Visual inspection ........................13 Shipping and storage conditions ....................13 Requirements.........................13 Mounting and installation..........................15 Connecting the battery ......................15...
  • Page 6 Replacement parts .............................43 Disposal..............................45 10.1 Disposing of the connectivity module..................45 10.2 Disposing of the battery ......................45 Service & Support............................47 Siemens Industry Online Support ..................47 Certificates and Licenses ...........................49 Certificates, approvals, standards..................49 Licenses ..........................50 Index................................51 SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 7: Introduction

    - and the relevant documentation. 1.1.2 Text references References to other texts always refer to the beginning of the chapter. Naming convention In this documentation, the generic term "Connectivity module" is used for the "SIMOTICS CONNECT 400" product. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 8 Introduction 1.2 Naming convention SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 9: Safety Instructions

    ● Through appropriate training and experience, they are able to recognize and avoid risks and potential dangers in their particular field of activity. ● Those responsible have instructed them to carry out the work. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 10: Security Information

    Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber...

  • Page 11: Description

    Further, it provides recommendations for preventive maintenance activities, for example. Additional information Additional information on the SIMOTICS CONNECT 400 connectivity module is provided in the "SIMOTICS CONNECT 400" Operating Instructions. "SIMOTICS CONNECT 400" connectivity module The connectivity module mounted on the motor captures important operating and status information of the motor.
  • Page 12 Description 3.2 "SIMOTICS CONNECT 400" connectivity module The motor data that is captured is transferred to SIDRIVE IQ via a WLAN interface where it is analyzed. Components The connectivity module encompasses the following components: ● Integrated sensors to measure the motor data ●...

  • Page 13: Data Security

    ● Data is stored in the connectivity module until it is transferred to the Cloud ● Data is sent encrypted via a WLAN interface according to the "WPA2" standard ● Data is transmitted to the Cloud via a secure connection with TLS encryption SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 14 Description 3.3 Data security SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 15: Preparations For Use

    To set up the connectivity module, install the "SIDRIVE IQ Config" application on a mobile device. The mobile device must satisfy the following requirements: ● "Android" operating system with Version V5.0 or later ● Functioning Internet connection SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 16 Wi-Fi 802.11b/g/n standard. Only WLAN passwords with a maximum length of 32 characters are supported. Ports that are used Release the following ports used by SIMOTICS CONNECT 400 to allow an Internet connection to be established: ● Secured data exchange with SIDRIVE IQ: TCP port: 443 ●...

  • Page 17: Mounting And Installation

    Mounting and installation NOTICE SIMOTICS CONNECT 400 housing with an IP54 degree of protection If the ambient conditions according to IP54 cannot be ensured at the installation location – or if a higher degree of protection is required – then the user must apply additional measures to ensure safe and reliable operation.
  • Page 18 4. Reattach the front cover. Carefully ensure that the cover is precisely in the correct position. 5. Tighten the two screws by hand. The thread can be damaged if too much force is applied. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 19: Commissioning

    ● You have the valid access data for SIDRIVE IQ. Installing the "SIDRIVE IQ Config" application 1. Open the Google Play Store. 2. Install the Siemens "SIDRIVE IQ Config" application. The "SIDRIVE IQ Config" application requires authorization to access the following: – Bluetooth interface –...
  • Page 20 Use the "Identify" function to check that you are connected with the required connectivity module (Page 31). Note Length limitations of the BLE name The BLE name is used to simply identify the device via Bluetooth. The length of the name is restricted to 7 characters. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 21 Battery state of the connectivity module (the current version does not support this display.) ⑨ "Connect" button to establish a connection to the connectivity module ⑩ Update status of the connectivity module firmware (the current version does not support this display.) ⑪ Status of the connectivity module SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 22: Log In With The Connectivity Module

    ● The password (comprises the last 6 digits of the serial number as stamped on the connectivity module nameplate) After logging in for the first time, change the user name and the password of the "SIDRIVE IQ Config" application in menu "Settings > User". SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 23: Making The Necessary System Settings

    ● NTP server (time server): Optionally, you can set another NTP server, e.g. a server within your own network. Procedure 1. Select the "Settings" menu. 2. Select the "System" submenu. 3. If required, set another "time server" (URL). SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 24: Setting Up A Wlan Connection

    The current version of the connectivity module does not support a proxy server configuration. The connectivity module encrypts your data according to the "WPA2" security standard. For data transfer, the connectivity module supports WLAN connections with a frequency of 2.4 GHz and the Wi-Fi standard 802.11b/g/n. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 25: Onboarding Process Using The "Sidrive Iq Config" Application

    5. Confirm your entries by clicking on "Send". Onboarding process using the "SIDRIVE IQ Config" application Onboarding involves the connection and registration process, with all of its associated settings, from the connectivity module to SIDRIVE IQ Fleet. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 26: Starting The Onboarding Process Via The "Sidrive Iq Config" Application

    "Motor assignment" step. If the connectivity module is replaced by another module, then you must reassign the motor serial number. This operation then updates the associated motor information. Only assign the SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 27: Entering Asset Data

    Once you have started the onboarding process, you must complete the associated asset data. The MindSphere URL and the path for registration are already preset as default setting. The following diagram shows the dialog to enter asset data: SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 28: Logging In To Mindsphere

    While you are logged in to the "SIDRIVE IQ Config" application, the SIDRIVE IQ login data is saved for logging in to MindSphere for further onboarding processes. If you close the application, then you are automatically logged out of MindSphere. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 29: Exiting The Onboarding Process Via The "Sidrive Iq Config" Application

    Repeat the onboarding process if you have selected an incorrect setting. 1. Check the asset data. 2. Confirm the onboarding process by clicking on "Onboarding". A dialog box to select the operating mode opens. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 30 4. If there are several parameter sets in the rated motor data, select the parameter set that corresponds to the connection conditions for your particular motor. A dialog box to select the application opens. 5. Select the application. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 31 OFF state. Precise data is only displayed in the SIDRIVE IQ once the calibration procedure has been completed. ● Value "0": Motor off (OFF), sensor calibrated ● Value "1": Motor state not defined, sensor not calibrated ● Value "3": Motor on (RUN), sensor calibrated SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 32 Commissioning 6.7 Onboarding process using the "SIDRIVE IQ Config" application SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 33: Operation

    ● 24 hours – interval when the saved data is transferred to SIDRIVE IQ You can change these settings within a specified range of between 1 and 48 hours. Note Effects that influence the battery service life Shorter intervals result in a shorter battery lifetime. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 34: Changing The User Data Of The Connectivity Module

    4. Change the synchronization interval. Changing the user data of the connectivity module 1. Select the "Settings" menu. 2. Select the "User" submenu. 3. Change the user names. The user name name may not exceed 20 characters. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 35: Adapting The Location Settings

    While commissioning the connectivity module, the location of your asset is determined using the site determination of your mobile device. If the location of your asset changes after commissioning the connectivity module, then appropriately change the location setting of your asset. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 36 2. Select the "System" submenu. The longitude and latitude degrees are displayed as decimal degrees for the current location. 3. Change the values. 4. Confirm your changes by clicking on "Apply". The location settings are changed. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 37: Maintenance

    3. Scroll to the end of the "System" submenu. The installed firmware version is displayed. 8.1.3 Updating the connectivity module firmware Firmware updates are available (https://support.industry.siemens.com/cs/de/en/ps/25522/dl) to keep the connectivity module firmware up-to-date, and to implement new functions. Update the firmware using the "SIDRIVE IQ Config" application. Requirements ●...
  • Page 38 5. Update the firmware using one of the following options: – Via an Internet address (URL) – Load from a file that is resident on your mobile device Siemens provides the firmware in the form of a ".bin" file (https:// support.industry.siemens.com/cs/de/en/ps/25522/dl).

  • Page 39: Restoring Factory Settings And Resetting User Data

    SIDRIVE IQ are lost. To avoid losing any data, before you restart the connectivity module, run the "Start MindSphere synchronization" function. Starting MindSphere This starts transferring measurement data from the connectivity module memory to SIDRIVE IQ. synchronization Onboarding Starts the onboarding process to SIDRIVE IQ. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 40: Replacing The Connectivity Module

    8. Insert the battery connector. 9. Reattach the front cover. Ensure that the cover fits precisely. 10.Tighten the 2 central fastening screws at the front cover by hand. 11.Configure the connectivity module from new. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 41: Replace The Battery

    When a battery is changed, device configuration data are kept in the retentive memory. The following data are lost: ● Measurement data after the last transfer to SIDRIVE IQ ● The associated date and time of the connectivity module SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 42: Mounting Bracket Fastening

    When the terminal box is located at the drive end, the center of the connectivity module should be 210 mm away from the non-drive end bearing SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 43 ● The cooling ribs to which the mounting bracket is to be bonded are thoroughly cleaned, dry and free of any grease. ● You have carefully read the usage instructions on the adhesive package. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 44 5. Allow the adhesive applied to the mounting bracket to dry. Carefully comply with the usage instructions provided on the adhesive package. 6. Mounting the connectivity module onto the bracket (Page 38). 7. Allow the adhesive to completely dry. SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 45: Replacement Parts

    The link to the Spares on Web for each configured asset is available in the SIDRIVE IQ application "IQ Fleet". Spare parts for the connectivity module You can order spare parts through the regional Siemens support organization. When ordering spare parts, enter the following data: ● Order number of the connectivity module ●...
  • Page 46 Replacement parts SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 47: Disposal

    ● Dispose of used lithium batteries individually as special waste. ● Dispose of used lithium batteries in compliance with all of the local regulations. ● Used lithium batteries can be recycled. Recycle your old batteries! SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 48 Disposal 10.2 Disposing of the battery SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 49: Service & Support

    Service & Support Siemens Industry Online Support Technical questions or additional information If you have any technical questions or require additional information, please contact Technical Support (https://support.industry.siemens.com/cs/ww/en/sc/4868). Have the following connectivity module data ready: ● Type ● Order number Contact person Please contact your local partner if you wish to request service.
  • Page 50 Service & Support A.1 Siemens Industry Online Support SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 51: Certificates And Licenses

    CE marking The SIMOTICS CONNECT 400 product complies with the requirements and protective goals of the following EU Directives. RED Directive 2014/53/EU The product is designed for use in an industrial environment.

  • Page 52: Licenses

    Licenses Use of open source software (OSS) The SIMOTICS CONNECT 400 product uses open source software that has either been left unchanged, or has been modified by us. Licensing terms and sources that are to be published are included on the CD-ROM that is supplied with the SIMOTICS CONNECT 400.

  • Page 53: Index

    Identifying the connectivity module, 31 Identifying the firmware version, 35 Safety instructions, 7 Installing SIDRIVE IQ Config, 17 Setting up a WLAN connection, 22 SIDRIVE IQ Fleet, 9 Spares on Web, 43 Start onboarding, 24 SIMOTICS CONNECT 400 Operating Instructions, 07/2019...

  • Page 54: Simotics Connect

    Index Storage conditions, 13 Synchronization intervals, 31 Technical Support, 47 Transport conditions, 13 Updating SIDRIVE IQ Config, 35 Updating the firmware, 35 Visual inspection, 13 SIMOTICS CONNECT 400 Operating Instructions, 07/2019...
  • Page 56 Further Information https://www.siemens.com/sidrive-iq Siemens AG Digital Industries Postfach 48 48 90026 Nürnberg GERMANY...

Table of Contents