Siemens SIMOCODE pro Programming And Operating Manual page 180

Description of the blocks
4.5 Block for statistical function MMStat
①
②
③
④
⑤
⑥
⑦
⑧
Note
The consumed energy parameter is enabled when a voltage module is configured.
180
Display of the mode and button for switching between modes
Operating hours ( ,
D_OpH
Number of starts, number of starts "clockwise," number of starts "counterclockwise"
( , ,
N_Strt N_IntCwStrt N_IntCcwStrt
Permissible starts (
P_Strt
Motor stop time ( )
M_StpTm
Consumed energy in KWh (
Number of parameterizations (
Number of overload trips (
Number of internal overload trips (
Time until test required (
TmTstReq
Button for updating the data (
tion level 5 and higher
Last successfull Timestamp of Read Data
Navigation button
Navigation to the connected MMOperation block.
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
, )
M_OpH M_IntOpH
)
)
)
EngyCon
)
N_Param
)
N_OvlTrp
)
N_IntOvlTrp
)
). Button is deactivated if
RdDataOp
; authoriza-
RackF_Act = 1
SIMOCODE pro PCS 7 Library V9.0