Siemens SIMOCODE pro Programming And Operating Manual page 60

Block icons and faceplate views
3.2 Faceplates
Authorization levels
Some commands are subject to permission with authorization levels via WinCC. The
authorization levels are updated when a view is opened. The user can only execute the
commands that are enabled for him.
The authorization levels are created for the project by means of a user ID.
Figure 3-3 Assigning authorization levels in WinCC
Reference
The configuration of faceplates and icons follow the standards of the Advanced Process
Library.
For more information about this and authorization levels, refer to Function Manual "Process
Control System PCS7, PCS7 Advanced Process Library V9" on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109482346).
60
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
SIMOCODE pro PCS 7 Library V9.0