Siemens SIMOCODE pro Programming And Operating Manual page 135

Table 4- 44 DiagEvt2 – event diagnostics for SIMOCODE pro devices
Bit Meaning
0 Number of starts >
1 Just one start possible
2 Motor operating hours >
3 Motor stop time >
4 Limit monitor 1
5 Limit monitor 2
6 Limit monitor 3
7 Limit monitor 4
8 External fault 1
9 External fault 2
10 External fault 3
11 External fault 4
12 External fault 5
13 External fault 6
14 AM1 open circuit
15 DM-F safety-oriented tripping
16 DM-F monitoring interval for mandatory testing - test required
17 Timestamping function active + OK
18 DM-FL safety OK
19 DM-F PROFIsafe active
20 Configured operator panel missing
21 Module not supported
22 No module voltage BU2
23 Memory module read in
24 Memory module programmed
25 Memory module erased
26 Addressing plug read in
27 Parameter Blocking during start-up active
28 Parameter changes not allowed in the current operating state
29 Device does not support the required functions
30 Wrong parameter
31 Wrong password
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Description of the blocks
4.3 MMOprtn block
135