Mmmeas - Standard 2 - Siemens SIMOCODE pro Programming And Operating Manual

Current values
①
Current values as bars (Curr_OpScale high value, low value)
② Phase current in % le (CurrL1, CurrL2, CurrL3)
③
Maximum motor current in % le (ImMax)
④
Last trip current in % le (TripCurr)
⑤ Phase unbalance in % (PhaUnbal)
Thermal motor model
⑥ Thermal memory in % (ThmMotMod)
⑦
Remaining motor cooling-down period (MotColTm)
⑧
Remaining time to trip (Triptime)
⑨ Last successfull Timestamp of Read Data
⑩
Button for updating the data (RdDataOp).
Button is deactivated if RackF_Act = 1, authorization level 5 and higher
(ProcessControling)
These parameters are enabled when a current measuring module is connected.
4.4.9.3

MMMeas - Standard 2

Standard 2 view
Module Type
Voltage Module
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
4.4 Block for MMMeas measured value function
Availability
Yes
No
Description of the blocks
Button Status Operation Control
Enabled
Disabled
167