Show System Buffers - Dell PowerConnect J-EX4200-24T Software Manual

show system buffers

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
show system buffers
show system buffers
<all-members>
<local>
<member member-id>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about the buffer pool that the Routing Engine uses for local traffic.
Local traffic is the routing and management traffic that is exchanged between the Routing
Engine and the Packet Forwarding Engine within the router or switch, as well as the routing
and management traffic from IP (that is, from OSPF, BGP, SNMP, ping operations, and
so on).
—Show all buffer statistics.
none
all-members —(J-EX4200 switches only) (Optional) Show buffer statistics for on all
members of the Virtual Chassis configuration.
local —(J-EX4200 switches only) (Optional) Show buffer statistics for the local Virtual
Chassis member.
—(J-EX4200 switches only) (Optional) Show buffer statistics for the
member member-id
specified member of the Virtual Chassis configuration. Replace
value from 0 through 9.
A special type of memory buffer called a cluster is 2 KB in size. For more information, see
The Design and Implementation of the 4.4BSD Operation System by McKusic, Bostic,
Karels, and Quarterman.
view
show system buffers on page 674
Table 97 on page 674 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 42: Operational Mode Commands for System Monitoring
show system buffers
with a
member-id
command.
673