File Copy - Dell PowerConnect J-EX4200-24T Software Manual

file copy

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
file copy (A File from file copy (A File from
the Router to a PC) the Router to a PC)
file copy
(A Configuration File
Between Routing
Engines)
file copy (A Log File
Between Routing
Engines)
file copy source destination
<source-address address>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Copy files from one place to another on the local router or switch or between the local
router or switch and a remote system.
source —Source of the original file. Specify this as a URL or filename.
destination —Destination of the copied file. Specify this as a URL or filename. If you are
copying a file to the current directory (your home directory on the local router or
switch) and are not renaming the file, specify the destination with a period (.).
—(Optional) Source IP host address. This option is useful for
source-address address
specifying the source address of a secure copy (scp) file transfer.
maintenance
file copy (A File from the Router to a PC) on page 621
file copy (A Configuration File Between Routing Engines) on page 621
file copy (A Log File Between Routing Engines) on page 621
When you enter this command, you are provided feedback on the status of your request.
user@host> file copy /var/tmp/rpd.core.4 berry:/c/junipero/tmp
...transferring.file...... |
The following sample command copies a configuration file from Routing Engine 0 to
Routing Engine 1:
user@host> file copy /config/juniper.conf re1:/var/tmp/copied-juniper.conf
The following sample command copies a log file from Routing Engine 0 to Routing Engine
1:
user@host> file copy lcc0-re0:/var/log/chassisd lcc0-re1:/var/tmp
Chapter 42: Operational Mode Commands for System Monitoring
0 KB | 0.3 kB/s | ETA: 00:00:00 | 100%
621