Configure - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

configure

Syntax
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
configure configure
206
configure
<dynamic>
<exclusive>
<private>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Enter configuration mode. When this command is entered without any optional keywords,
everyone can make configuration changes and commit all changes made to the
configuration.
—Enter configuration mode.
none
—(Optional) Configure routing policies and certain routing policy objects in a
dynamic
dynamic database that is not subject to the same verification required in the standard
configuration database. As a result, the time it takes to commit changes to the
dynamic database is much shorter than for the standard configuration database.
You can then reference these policies and policy objects in routing policies you
configure in the standard database.
—(Optional) Lock the candidate configuration for as long as you remain in
exclusive
configuration mode, allowing you to make changes without interference from other
users. Other users can enter and exit configuration mode, but they cannot change
the configuration.
—(Optional) Allow multiple users to edit different parts of the configuration at
private
the same time and to commit only their own changes, or to roll back without
interfering with one another's changes. You cannot commit changes in configure
private mode when another user is in configure exclusive mode.
For more information about the different methods of entering configuration mode and
the restrictions that apply, see the Junos OS System Basics Configuration Guide.
configure
show configuration on page 244
configure on page 206
When you enter this command, you are placed in configuration mode and the system
prompt changes from
hostname>
user@host> configure
Entering configuration mode
[edit]
user@host#
to .
hostname#