Dell PowerConnect J-EX4200-24T Software Manual page 384

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
fpc
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
312
fpc slot {
pic pic-number {
sfpplus {
pic-modemode;
}
}
power-budget-priority priority;
[edit chassis]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
On a J-EX4200 switch, specify the port of the SFP+ uplink module for which you want
to configure the operating mode.
On a J-EX8200 switch, specify the line card slot for which you want to assign a power
priority.
—Number of the slot:
slot
0—Standalone J-EX4200 switches. The FPC refers to the switch itself.
0–9—J-EX4200 switch in a Virtual Chassis configuration. The value corresponds to
the switch's member ID.
0–7—J-EX8208 switch. The slot is a line card slot.
0–15—J-EX8216 switch. The slot is a line card slot.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Setting the Mode on an SFP+ Uplink Module (CLI Procedure) on page 921
Configuring the Power Priority of Line Cards (CLI Procedure) on page 308