Show Ntp Associations - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show ntp associations

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 35: show ntp associations Output Fields
Field Name Field Description
Address or name of the remote NTP peer.
remote
Reference identifier of the remote peer. If the reference identifier is not known, this field shows a value
refid
of
Stratum of the remote peer.
st
Type of peer:
t
When the last packet from the peer was received.
when
Polling interval, in seconds.
poll
Reachability register, in octal.
reach
delay Current estimated delay of the peer, in milliseconds.
offset Current estimated offset of the peer, in milliseconds.
Current estimated dispersion of the peer, in milliseconds.
disp
248
show ntp associations
<no-resolve>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display Network Time Protocol (NTP) peers and their state.
—Display NTP peers and their state.
none
—(Optional) Suppress symbolic addressing.
no-resolve
view
show ntp status on page 250
show ntp associations on page 249
Table 35 on page 248 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
0.0.0.0 .
(broadcast), (local),
b l
show ntp associations
(multicast), or (unicast).
m u
command.