Show System Reboot - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show system reboot

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
show system reboot show system reboot
252
show system reboot
<both-routing-engines>
show system reboot
<all-members>
<both-routing-engines>
<local>
<member member-id>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display pending system reboots or halts.
—Display pending reboots or halts on the active Routing Engine.
none
—(J-EX4200 switches only) (Optional) Display halt or reboot request
all-members
information for all members of the Virtual Chassis configuration.
—(Systems with multiple Routing Engines) (Optional) Display halt
both-routing-engines
or reboot request information on both Routing Engines.
—(J-EX4200 switches only) (Optional) Display halt or reboot request information
local
for the local Virtual Chassis member.
—(J-EX4200 switches only) (Optional) Display halt or reboot request
member member-id
information for the specified member of the Virtual Chassis configuration. Replace
with a value from 0 through 9.
member-id
maintenance
show system reboot on page 252
user@host> show system reboot
reboot requested by root at Wed Feb 10 17:40:46 1999
[process id 17885]