Configuring A Custom Display Message - Dell PowerConnect J-EX4200-24T Software Manual

Configuring a Custom Display Message

Related
Documentation
Configuring Date and Time for the J-EX Series Switch (J-Web Procedure)
You can configure the second line of the LCD to display a custom message temporarily
for 5 minutes or permanently.
To display a custom message temporarily:
On a standalone J-EX4200 switch or a J-EX8200 switch:
user@switch> set chassis display message message
On a J-EX4200 switch in a Virtual Chassis configuration:
user@switch> set chassis display message message fpc-slot slot-number
To display a custom message permanently:
On a standalone J-EX4200 switch or a J-EX8200 switch:
user@switch> set chassis display message message permanent
On a J-EX4200 switch in a Virtual Chassis configuration:
user@switch> set chassis display message message fpc-slot slot-number permanent
NOTE: The
Menu
configured to display a custom message.
To disable the display of the custom message:
user@switch> clear chassis display message
You can view the custom message by issuing the command
LCD Panel in J-EX4200 Switches
LCD Panel in a J-EX8200 Switch
To configure date and time on a J-EX Series switch:
Select >
Configure System Properties
1.
To modify the information, click
2.
as described in Table 31 on page 168.
Click one:
3.
To apply the configuration, click OK.
To cancel your entries and return to the System Properties page, click Cancel.
button and the button are disabled if the LCD is
Enter
>
Date & Time
. Enter information into the Edit Date & Time page
Edit
Chapter 15: Initial Configuration
.
show chassis lcd
.
167