Request System Logout - Dell PowerConnect J-EX4200-24T Software Manual

request system logout

Syntax
Release Information
Description
Options
Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
request system logout request system logout
request system logout (pid pid | terminal terminal | user username)
<all>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Log out users from the router or switch and the configuration database. If a user held the
lock, this command clears the exclusive lock.
configure exclusive
all —(Optional) Log out all sessions owned by a particular PID, terminal session, or user.
(On a TX Matrix or TX Matrix Plus router, this command is broadcast to all chassis.)
pid pid —Log out the user session using the specified management process identifier (PID).
The PID type must be management process.
terminal terminal —Log out the user for the specified terminal session.
user username —Log out the specified user.
For information about using the
Basics Configuration Guide.
configure
request system logout on page 215
When you enter this command, you are provided feedback on the status of your request.
user@host> request system logout user tammy all
Connection closed by foreign host.
Chapter 17: Operational Mode Commands for System Setup
command, see the Junos OS System
configure exclusive
215