Auxiliary - Dell PowerConnect J-EX4200-24T Software Manual

auxiliary

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
boot-server (NTP)
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
auxiliary {
type terminal-type;
}
[edit system ports]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the characteristics of the auxiliary port.
The auxiliary port is disabled.
type terminal-type —Type of terminal that is connected to the port.
Range: , ,
ansi vt100 small-xterm
Default: The terminal type is unknown, and the user is prompted for the terminal type.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the Junos OS to Set Console and Auxiliary Port Properties
boot-server address;
[edit system ntp]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the server that NTP queries when the router or switch boots to determine the
local date and time.
When you boot the router or switch, it issues an
server to determine the local date and time. You need to configure a server that the router
or switch uses to determine the time when the router or switch boots. Otherwise, NTP
will not be able to synchronize to a time server if the server's time appears to be very far
off of the local router's or switch's time.
address —Address of an NTP server. You must specify an address, not a hostname.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Synchronizing and Coordinating Time Distribution Using NTP
Chapter 16: Configuration Statements for System Setup
,
xterm
ntpdate request, which polls a network
173