Configuring The Lcd Panel On J-Ex Series Switches (Cli Procedure) - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

Configuring the LCD Panel on J-EX Series Switches (CLI Procedure)

Disabling or Enabling Menus and Menu Options on the LCD Panel
166
Installing and Connecting a J-EX8208 Switch
Installing and Connecting a J-EX8216 Switch
The LCD panel on the front panel of J-EX Series switches displays a variety of information
about the switch in the Status menu and provides the Maintenance menu to allow you
to perform basic operations such as initial setup and reboot. You can disable these menus
or individual menu options if you do not want switch users to use them. You can also set
a custom message that will be displayed on the panel.
This topic describes:
Disabling or Enabling Menus and Menu Options on the LCD Panel on page 166
Configuring a Custom Display Message on page 167
By default, the Maintenance menu, the Status menu, and the options in those menus in
the LCD panel are enabled. Users can configure and troubleshoot the switch using the
Maintenance menu and view certain details about the switch using the Status menu.
If you do not want users to be able to use those menus or use some of the menu options,
you can disable the menus or individual menu options. You can re-enable the menus or
menu options.
Issue the
show chassis lcd
options are currently enabled.
NOTE: On some platforms you must specify an FPC slot number in these
commands. See the lcd-menu statement for details.
To disable a menu:
[edit]
user@switch# set chassis lcd-menu menu-item menu-name disable
To enable a menu:
[edit]
user@switch# delete chassis lcd-menu menu-item menu-name disable
To disable a menu option:
[edit]
user@switch# set chassis lcd-menu menu-item menu-option disable
To enable a menu option:
[edit]
user@switch# delete chassis lcd-menu menu-item menu-option disable
operational mode command to see which menus and menu