Pool - Dell PowerConnect J-EX4200-24T Software Manual

pool

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
pool address/prefix-length {
address-range {
low address;
high address;
}
exclude-address {
address;
}
}
[edit system services dhcp]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
For J-EX Series switches . Configure a pool of IP addresses for DHCP clients on a subnet.
When a client joins the network, the DHCP server dynamically allocates an IP address
from this pool.
—Lowest and highest IP addresses in the pool that are available for dynamic
address-range
address assignment. If no range is specified, the pool will use all available addresses
within the subnet specified. (Broadcast addresses, interface addresses, and excluded
addresses are not available.)
—Addresses within the range that are not used for dynamic address
exclude-address
assignment. You can exclude one or more addresses within the range.
The remaining statements are explained separately.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Chapter 37: Configuration Statements for System Services
485