Broadcast - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

broadcast

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
174
broadcast address <key key-number> <version value> <ttl value>;
[edit system ntp]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the local router or switch to operate in broadcast mode with the remote system
at the specified . In this mode, the local router or switch sends periodic broadcast
address
messages to a client population at the specified broadcast or multicast
you include this statement only when the local router or switch is operating as a
transmitter.
—The broadcast address on one of the local networks or a multicast address
address
assigned to NTP. You must specify an address, not a hostname. If the multicast
address is used, it must be
key key-number —(Optional) All packets sent to the address include authentication fields
that are encrypted using the specified key number.
Range: Any unsigned 32-bit integer
ttl value —(Optional) Time-to-live (TTL) value to use.
Range: 1 through 255
Default: 1
—(Optional) Specify the version number to be used in outgoing NTP packets.
version value
Range: 1 through 4
Default: 4
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the NTP Time Server and Time Services
.
224.0.1.1
. Normally,
address