Uploading A Configuration File (J-Web Procedure) - Dell PowerConnect J-EX4200-24T Software Manual

Related
Documentation

Uploading a Configuration File (J-Web Procedure)

Log in to the switch using your username and password.
5.
To enter configuration mode:
6.
user@switch> configure
You will see this output, with the hash or pound mark indicating configuration mode.
Entering configuration mode
[edit]
user@switch#
Load the configuration file:
7.
[edit]
user@switch# load merge terminal
At the cursor, paste the contents of the Clipboard using the mouse and the Paste icon:
8.
[edit]
user@switch# load merge terminal
[Type ^D at a new line to end input]
>Cursor is here. Paste the contents of the clipboard here<
Press Enter.
9.
Press Ctrl+D to set the end-of-file marker.
10.
To view results of the configuration steps before committing the configuration, type the
show command at the user prompt.
To commit these changes to the active configuration, type the
user prompt.You can also edit the configuration interactively using the CLI and commit
it at a later time.
Uploading a Configuration File (J-Web Procedure) on page 337
Understanding Configuration Files for J-EX Series Switches on page 321
You can create a configuration file on your local system, copy the file to the J-EX Series
switch and then load the file into the CLI. After you have loaded the configuration file,
you can commit it to activate the configuration on the switch. You can also edit the
configuration interactively using the CLI and commit it at a later time.
To upload a configuration file from your local system:
Select
Maintain > Config Management > Upload
1.
The main pane displays the File to Upload box.
Specify the name of the file to upload using one of the following methods:
2.
Type the absolute path and filename in the File to Upload box.
Click to navigate to the file.
Browse
Click
Upload and Commit
3.
Chapter 24: Managing Junos OS Configuration
.
to upload and commit the configuration.
command at the
commit
337