show chassis environment fpc
Syntax
Release Information
Description
Options
Required Privilege
Level
Output Fields
Table 86: show chassis environment fpc Output Fields
Field Name
Field Description
Status of the FPC:
State
Information about the voltage supplied to the FPC. The left column displays the required power, in
Power
volts. The right column displays the measured power, in millivolts.
show chassis environment fpc
<slot>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
(J-EX Series switches) Display environmental information about Flexible PIC
Concentrators (FPCs).
none
—Display environmental information about all FPCs.
slot
—(Optional) Display environmental information about an individual FPC:
user@host> show chassis environment fpc 1 lcc 1
user@host> show chassis environment fpc 9
J-EX Series switches:
J-EX4200 standalone switches—Replace
J-EX4200 switches in a Virtual Chassis configuration—Replace
from 0 through 9 (switch's member ID).
J-EX8208 switches—Replace
J-EX8216 switches—Replace
view
Table 86 on page 637 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
—FPC is not detected by the router.
Unknown
—No FPC is present.
Empty
Present
—FPC is detected by the chassis daemon but is either not supported by the current version
of the Junos OS, or the FPC is coming up but not yet online.
—FPC is in intermediate or transition state.
Ready
—Intermediate state during which the FPC is coming up but not yet online, and the
Announce online
chassis manager acknowledges the chassisd FPC online initiative.
—FPC is online and running.
Online
Offline
—FPC is powered down.
—FPC is set to operate in diagnostics mode.
Diagnostics
Chapter 42: Operational Mode Commands for System Monitoring
slot
with 0.
slot
with a value from 0 through 7 (line card).
with a value from 0 through 15 (line card).
slot
show chassis environment fpc
slot
with a value
command.
637