Archive-Sites (Configuration File) - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

archive-sites (Configuration File)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
352
archive-sites {
file://<path>/<filename>;
ftp://username@host:<port>url-path password password;
http://username@host:<port>url-path password password;
scp://username@host:<port>url-path password password;
}
[edit system archival configuration]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Specify where to transfer the current configuration files. When specifying a URL in a Junos
OS statement using an IPv6 host address, you must enclose the entire URL in quotation
marks (" ") and enclose the IPv6 host address in brackets ([ ]). For example,
"scp://username<:password>@[ipv6-host-address]<:port>/url-path"
If you specify more than one archive site, the router or switch attempts to transfer the
configuration files to the first archive site in the list, moving to the next only if the transfer
fails. The format for the destination filename is
router-name_juniper.conf[.gz]_YYYYMMDD_HHMMSS
NOTE: The time included in the destination filename is always in Coordinated
Universal Time (UTC) regardless of whether the time on the router or switch
is configured as UTC or the local time zone. The default time zone on the
router or switch is UTC.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Using Junos OS to Configure a Router or Switch to Transfer Its Configuration to an
Archive Site
configuration on page 355
transfer-on-commit on page 358
.