Default-Address-Selection - Dell PowerConnect J-EX4200-24T Software Manual

default-address-selection

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
domain-name (Router)
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
default-address-selection;
[edit system]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Use the loopback interface,
The lo0 interface is the interface to the router's or switch's Routing Engine.
The outgoing interface is used as the source address.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the Junos OS to Select a Fixed Source Address for Locally Generated
TCP/IP Packets
Junos OS Network Interfaces Configuration Guide
domain-name domain-name;
[edit system]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the name of the domain in which the router or switch is located. This is the
default domain name that is appended to hostnames that are not fully qualified.
—Name of the domain.
domain-name
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the Domain Name for the Router or Switch
Chapter 16: Configuration Statements for System Setup
, as the source address for all locally generated IP packets.
lo0
177