Monitoring System Process Information - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 80: Summary of the Key Output Fields for Chassis Information (continued)
Field
Name/Value
Related
Documentation

Monitoring System Process Information

Purpose
Action
Meaning
554
Values
Displays resource details:
State:
—Held in reset because of errors.
Dead
—The FPC is running diagnostics.
Diag
Dormant —Held in reset.
—No FPC is present.
Empty
—The FPC is online and running.
Online
Probed —Probe is complete. The FPC is awaiting restart of the Packet Forwarding
Engine (PFE).
—The FPC is waiting for the probe operation to start.
Probe-wait
Total CPU DRAM
—Date and time the switch was last rebooted.
Start time
Monitoring System Process Information on page 554
Monitoring System Properties on page 550
Dashboard for J-EX Series Switches on page 534
Use the monitoring functionality to view the processes running on the switch.
To view the software processes running on the switch in the J-Web interface, select
Monitor>System View>Process Details.
To view the software processes running on the switch in the CLI, enter the following
command.
show system processes
Table 81 on page 555 summarizes the output fields in the system process information
display.
The display includes the total CPU load and total memory utilization.
—Total DRAM, in megabytes, available to the FPC.