Transfer-Interval (Configuration) - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

transfer-interval (Configuration)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
transfer-on-commit
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
358
transfer-interval interval;
[edit system archival configuration]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the switch to periodically transfer its currently active configuration to an archive
site.
interval —Interval at which to transfer the current configuration to an archive site.
Range: through minutes
15 2880
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
archive on page 560
configuration on page 355
transfer-on-commit on page 358
transfer-on-commit;
[edit system archival configuration]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the switch to transfer its currently active configuration to an archive site each
time you commit a candidate configuration.
NOTE: When specifying a URL in a Junos OS statement using an IPv6 host
address, you must enclose the entire URL in quotation marks (" ") and enclose
the IPv6 host address in brackets ([ ]). For example,
"ftp://username<:password>@[ipv6-host-address]<:port>/url-path"
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
archive on page 560
configuration on page 355
transfer-interval on page 358